Alliance Laundry Systems P232156R9 manual Basic Installation/Operation

Basic Installation/Operation

CAUTION

Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury.

SW025

NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage.

IMPORTANT: To prevent out-of-balance conditions, premature wear or damage to machine when using laundry nets, use several small nets in a load.

5.When loading is complete, make sure that all fabric is inside the basket.

6.Close and lock the door.

7.Dry supplies can be placed in the supply dispenser compartment cups prior to the start of each cycle. Be sure to return the supply dispenser compartment cups before the start of each cycle.

8.Liquid supplies can be injected directly into the supply dispenser by an external chemical supply system.

NOTE: Supply dispenser compartment cups must not be removed when an external chemical injection supply system is attached to the washer- extractor.

9.Select the desired cycle. The corresponding LED indicator for that cycle will light.

10.Press the Start keypad.

NOTE: The cycle number can be changed during the FIRST FILL ONLY by pressing another cycle select key.

11.At the conclusion of the cycle, the display will show ‘doNE’. The door can be unlocked. At this point the washer-extractor may be unloaded.

12.When the door is opened, the display will revert to showing “----” and the default cycle.

42 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232156