Heat Controller MSS-024B/A Indoor Unit Installation, Wire or gas line can cause death or injury

2) Indoor Unit Installation

The mounting wall should be strong and solid enough to protect it from the vibration.

1.Mount the installation plate on the wall with four Type "A' screws.

(it mounting the unit on the concrete wall, consider

using anchor bolts.)

"Always mount the Installation Plate horizontally by aligning the marking-off line by means of the thread and a level.

2.Drill the piping hole with 70mm(2.75") dia. holecore drill.

"Drill the Piping hole at either the right or the left and the hole should be slightly slanted to the outdoor side.

IMMM

Avoid areas where electrical wiring, conduits or

gas lines are located. Accidentally cutting a live

wire or gas line can cause death or injury.

Installation Plate

.o o.

Type 'A' screw	p/	marking-ott line
	/	Thread
	Weight

The lower left and right side of Installation Plate

Left rear piping Right rear piping

. E m E

9k Vk 18K 24k

,2.75' Omn

Indallation plate

WALL

IndoorOutdoor

E io

V ' ý N

e

0

0

-26-

0