Heat Controller MSH-024B/A, MSH-0186/A manual To remove the Cross-Flow Fan, To remove the Fan Motor

"Slightily pull the evaporator until left tab on end- plate is clear of the chassis.

"Lift the left side of evaporator slightly from the chassis carefully.

"Push right carefully in order to unhook the tabs on the right inside of the chassis and pull the evapo- rator toward you.

O~

r

5.To remove the Cross-Flow Fan.

"Loosen the screw securing the cross-flow fan to the fan motor shaft(do not remove).

"Pull the left end of the cross-flow fan with the selfaligning bearing out the groove.

"Remove the cross-flow fan by sliding it out from the shaft of fan motor.

6.To remove the Fan Motor.

"Pick it up from the groove. (Do not remove a black rubber as a spacer).

-48-

"