Heat Controller MSS-012B/A, MSH-0186/A, MSS-018B/A, MSH-01 2B/A, MSS-009B/A manual Drain hose Taping

10.Set the pipings and the connecting cable to the back of the chassis with the tubing holder

"Hook the edge of tubing holder to tap on chassis and push the bottom of tubing holder to be engaged in the bottom of chassis.

Drain hose

Taping

"

\ Tubing holder

ý(ýFFlook

11.Indoor unit installation

"Hook the indoor unit onto the upper portion of installation plate. (Engage the two hooks of the rear top of the indoor unit with the upper edge of the installation plate.)

Ensure the hooks are properly seated on the installation plate by moving it in left and right.

I (2pu5h

Connecting

cable

It

Dram hose

Press the lower left and right side of the unit against the

Installation Plate until the lower hooks engage with their

slots (sound click).

-32-

0