2) Connect the cable to the indoor unit

"

1.Connect the wires to the terminals on the control board Individually according to the outdoor unit connection.

"Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively.

"Be sure to refer to the wiring diagram label inside the cover control and carry out the correct field wiring.

Wrong wiring can cause the unit to misoperate to result in a fire hazard.

"Check local electrical codes and any specified wiring instructions or firnhatlons.

2.Attach the Grille onto the cabinet.

"Grasp lower the left and right side of the Grille and engage four tabs on the top inside edge of the chassis.

"Press the Grille toward the chassis until it will be back into place.

-36-

0

Page 35 Page 37
Page 36
Image 36
Heat Controller MSS-018B/A, MSH-0186/A, MSS-009B/A Connect the cable to the indoor unit, Attach the Grille onto the cabinet
Page 35 Page 37
Top Page Image Contents