Heat Controller MSH-0186/A Forced Operation, Crank Case Heater Coil Controlonly Heating model

"

rý

ICJ

8.Forced Operation

"If you lose wireless remote controller, you can operate the unit with forced operation button.

"The standard conditions are shown below.

	Cooling		Heating Model
		Room Temp ? 76°F	70°F 5 Room Temp < 76°F	Room temp < 70°F
	Model
Operation Mode	Cooling	Cooling	Soft Dry	Heating
Indoor Fan Speed	High	High	Softe Dry Rule	High
Setting Temp.	72"F	720F	7VF	76oF

"Unit operates in low fan speed for first 15 seconds, then switched to proper operation mode according to intake air temperature.

Press the Forced Operation Button.

Operation

Open the front

panel upward" Press the Forced Operation Button once to stop operation.

9. Crank Case Heater Coil Control(only Heating model)

"When the power is applied to the set, the heater operates unconditionally.

"Except for the heating mode operation, the heater is always to be off.

"During the heating mode operation, the heater and compressor are operated by turns. (Compressor ON -+ Heater OFF, Compressor OFF -+ Heater ON)

-21-

"