Heat Controller MSS-009B/A, MSH-0186/A, MSS-018B/A, MSH-01 2B/A, MSS-012B/A, MSS-024B/A, MSH-024B/A

"" Push right carefully in order to unhook the tabs on the right side of the chassis and pug the evapora- tor toward you.

5.To remove the Cross-Flow Fan

"Loosen the screw securing the cross-flow fan to the fan motor(do not remove).

"

"Pull the left end of the cross-flow fan with the self-aligning bearing out the groove.

"Remove the cross-flow fan by sliding it out from the shaft of fan motor.

6.To remove the Fan Motor

"Pick g up from the groove. (Do not remove a black rubber as a spacer).

-45-

"