Alliance Laundry Systems P232156R9 manual UW150 Models

Page 39

4.On UW150 models, use left hand to press and hold the door unlock button located on the door box. Refer to Figure 23.

UW150 MODELS

PHM597N

Figure 23

5.On UW150 models, use right hand to turn door handle counterclockwise and swing the door right to open. Refer to Figure 23.

Basic Installation/Operation

6.Load the washer-extractor to full capacity whenever possible, but do not exceed the rated dry-weight capacity of the machine if the fabric to be washed is quite dense, closely woven, and heavily soiled.

Overloading can result in an inferior wash. The operator may need to experiment to determine load size based on fabric content, soil content, and level of cleanliness required. Do not underload the machine. Underloading can result in premature bearing and sealing failure and out-of-balance situations.

PHM590N

Figure 24

F232156

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

37

Image 39

Contents Washer-Extractors Page Contents Important Safety Instructions Explanation of Safety MessagesBasic Installation/Operation Safety Decals Operator Safety UW UniLinc and M30 Control Models General SpecificationsSpecifications 100 125 150 Overall Dimensions Weight And Shipping InformationBalance Detection Door Opening InformationDrive Train Information Cylinder Speeds / Centrifugal Force DataElectrical Heating Optional Power Consumption UW A-Control, Variable-Speed ModelsWater Consumption MED UW P-Control, Variable-Speed Models Uwpv Models Specifications 100 125 150 Overall DimensionsWash/reverse, RPM / g Distribution, RPM / g Domestic shipping volume, ft.3 m3 UW 2 Speed Models UW35 UW60 Overall DimensionsCylinder Speeds/Centrifugal Force Data UW 3 Speed Models with P-Control or UW 3 Speed Models UW35 UW60 Overall Dimensions597 561 Crush hazard UniLinc and M30 Control Models100 125 150 911 14 UW150TV Uwav Models Models UW 35 Uwpv Models Uwpv Pocket Hardmount Machine Dimensions Refer to and FigureUW35PV UW125PV UW150PV 55.5 1410 64.5 1638 30.5 775 914 203 15.5 394 43.88 UW 2 Speed Models UW 3 Speed Models with P-Control or S-Control UW 3 Speed Models UW Models With UniLinc Control OperationFor Technical Service Distributor ABC UW Models With M30 Control Cycle Number Cycle Name PHM784N UW Models with S-Control Cycle is complete when display reads donE UW Models with P-Control Pre-Operating InstructionsOperating Instructions UW150 Models SW025 UW Models with A-Control Basic Installation/Operation UW Models with B-Control Basic Installation/Operation Disposal of Unit