4. Select End of Cycle signal (optional)
Your dryer may have an End of Cycle signal. The signal is helpful when drying items that should be removed from the dryer as soon as it stops. The End of Cycle signal is part of the PUSH TO Start button and is selectable. Turn the PUSH TO Start button to ON or OFF. The signal will sound only if the selector is set to On.
NOTE: When the Wrinkle Prevent setting is selected and the End of Cycle signal is on, the tone will sound every 5 minutes until the clothes are removed or the Wrinkle Prevent setting ends.
5. Press PUSH to START to begin cycle
Push and hold the PUSH to START knob to begin the cycle.
Promptly remove garments after cycle has completed to reduce wrinkling. Use the Wrinkle Prevent feature to avoid wrinkling when you are unable to remove a load from the dryer as soon as it stops.
12