ACCESSORIES
Enhance your dryer with these premium accessories.
For more
Part Number | Accessory: |
|
|
8212526 | Washer drip tray, fits under all |
|
|
31682 | |
|
|
1903WH | Laundry supply storage cart |
|
|
This washer does not include inlet water hoses. See “Installation Instructions” for installation accessories.
Using Less Water and Energy
This washer is designed to use less water and energy, and complies with all 2011 energy standards. Wash cycles with controlled temperatures are designed to maintain cleaning performance while using less water and energy compared to older traditional washers. As a result, water levels will be lower, and hot and warm wash temperatures may not be as warm as you are used to.
Traditional washer | Reduced water washer |
CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW
Good air flow
Along with heat, dryers require good air flow to efficiently dry laundry. Proper venting will reduce your drying times and improve your energy savings. See “Installation Instructions.”
The venting system attached to the dryer plays a big role in good air flow.
Service calls caused by improper venting are not covered by the warranty and will be paid by the customer, regardless of who installed the dryer.
Maintain good air flow by:
nCleaning your lint screen before each load.
nReplace plastic or foil vent material with 4" (102 mm) diameter heavy, rigid vent material.
4"
(102 mm)
nUse the shortest length of vent possible.
nUse no more than four 90° elbows in a vent system; each bend and curve reduces air flow.
Good 
Better 
nRemove lint and debris from the exhaust hood.
nRemove lint from the entire length of the vent system at least every 2 years. When cleaning is complete, be sure to follow the “Installation Instructions” supplied with your dryer for final product check.
nClear away items from the front the dryer.
Use Sensor Dry cycles for better fabric care and energy savings
Use the Sensor Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Sensor Dry cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to
4