2.Remove the 4 screws that attach to the inner door hinge and move the hinge to the other side. Reinstall the 4 screws.
3.Insert strike on the opposite side.
A
A. Door hinge
3.Reinstall plug strips on opposite side of the inner door.
4.Check for fingerprints on the glass. Clean glass if necessary.
5.Place the inner door assembly inside the outer door assembly. To fit correctly, the inner door assembly edge fits completely inside the outer door assembly edge.
6.Reassemble the inner and outer door assemblies with the 6 screws.
Reverse the strike
1.Use a small
2.Remove the strike
B
A
A. Plug strip (cannot be seen from this angle)
B. Door strike
Reinstall the door
1.Reattach door to dryer front panel with the 4 screws.
A
B
A. Dryer front panel
B. Door assembly
2.Check for fingerprints on the glass. Clean glass if necessary.
3.Close door and check that it latches securely.
21