Maytag W10057349A manual Electrical Requirements U.S.A. Only, Mobile home installations require

Page 7

Recommended installation spacing for recessed or closet installation, with stacked washer and dryer

The dimensions shown are for the recommended spacing.

48 in.2 *

(310 cm2)

3"* (7.6 cm)

 

3"* (7.6 cm)

24 in.2 *

1"* (2.5 cm)

(155 cm2)

 

*Required spacing

 

 

6"* (15.2 cm)

76" (193 cm)

5"*

 

 

 

1"

 

 

 

27"

 

1"

 

 

 

 

 

(12.7 cm)

 

 

(2.5 cm)

 

 

(68.6 cm)

(2.5 cm)

*Required spacing

Mobile home - Additional installation requirements

This dryer is suitable for mobile home installations. The installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280) or Standard CAN/CSA-Z240 MH.

Mobile home installations require:

„Metal exhaust system hardware, which is available for purchase from your dealer.

„Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening.

Electrical Requirements - U.S.A. Only

It is your responsibility

„To contact a qualified electrical installer.

„To be sure that the electrical connection is adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition and all local codes and ordinances.

The National Electric Code requires a 4-wire power supply connection for homes built after 1996, dryer circuits involved in remodeling after 1996, and all mobile home installations.

A copy of the above code standards can be obtained from: National Fire Protection Association, One Batterymarch Park, Quincy, MA 02269.

„To supply the required 3 or 4 wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply (or 3 or 4 wire, 120/208 volt electrical supply, if specified on the serial/rating plate) on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Connect to an individual branch circuit. Do not have a fuse in the neutral or grounding circuit.

„Do not use an extension cord.

„If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Electrical Connection

To properly install your dryer, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

„This dryer is manufactured ready to install with a 3-wire electrical supply connection. The neutral ground conductor is permanently connected to the neutral conductor (white wire) within the dryer. If the dryer is installed with a 4-wire electrical supply connection, the neutral ground conductor must be removed from the external ground connector (green screw), and secured under the neutral terminal (center or white wire) of the terminal block. When the neutral ground conductor is secured under the neutral terminal (center or white wire) of the terminal block, the dryer cabinet is isolated from the neutral conductor.

„If local codes do not permit the connection of a neutral ground wire to the neutral wire, see “Optional 3-wire connection” section.

„A 4-wire power supply connection must be used when the appliance is installed in a location where grounding through the neutral conductor is prohibited. Grounding through the neutral is prohibited for (1) new branch-circuit installations, (2) mobile homes, (3) recreational vehicles, and (4) areas where local codes prohibit grounding through the neutral conductors.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents W10057349A Sécheuse ÉlectriqueÍndice Table of ContentsYour safety and the safety of others are very important Dryer SafetyOptional Pedestal Installation InstructionsYou will need Installation clearancesDryer Dimensions Location RequirementsCloset installation Dryer only Recommended installation spacing for cabinet installationIt is your responsibility Mobile home Additional installation requirementsMobile home installations require Electrical Requirements U.S.A. OnlyIf connecting by direct wire If using a power supply cordIf your outlet looks like this Electrical Requirements Canada Only Style 1 Power supply cord strain relief Power Supply Cord Direct WireElectrical Connection U.S.A. Only Style 2 Direct wire strain relief Wire connection Direct wire Wire connection Power supply cord12.7 BDE CG F Page Venting Requirements If using an existing vent systemIf this is a new vent system Vent material Exhaust Optional exhaust installationsSpecial provisions for mobile home installations Alternate installations for close clearancesDetermine vent path Install Leveling Legs Install Vent SystemVent system chart Canada Complete InstallationConnect Vent U.S.AStarting Your Dryer Dryer USETo use a Sensor Cycle Type of Load Time Minutes Air DryHow Sensor Cycles Work To use a Timed CycleDrying and Cycle Tips Pausing or RestartingStopping Your Dryer Control LockCycles Status IndicatorOptional Features Drying Rack Option Changing Cycles, Options and ModifiersAs needed cleaning Cleaning the Dryer LocationCleaning the Lint Screen Every load cleaningChanging the Drum Light Cleaning the Dryer InteriorRemoving Accumulated Lint Vacation and Moving CareDryer Operation TroubleshootingCycle time too short Dryer ResultsLint on load For further assistance CanadaOur consultants provide assistance with This limited warranty does not cover Maytag Major Appliance WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA SécheusePièces fournies Instructions DinstallationPièces nécessaires Piédestal facultatif Exigences demplacementInstallation dans un placard Sécheuse seulement Dimensions de la sécheuseDégagements de séparation à respecter ’est à l’utilisateur qu’incombe la responsabilité de Espacement recommandé pour linstallation dans un placardLinstallation dans une maison mobile exige Spécifications électriquesEn cas dutilisation du système dévacuation existant Exigences concernant lévacuationBrides de serrage Conduit métallique rigideConduit métallique flexible CoudesAutres installations où le dégagement est réduit Installations d’évacuation facultativesPlanification du système d’évacuation Tableau des systèmes dévacuation Déterminer litinéraire dacheminement du conduitMise à niveau de la sécheuse Installation des pieds de nivellementSi la sécheuse ne démarre pas, vérifier ce qui suit Utilisation dun programme de détection Utilisation DE LA SécheuseComment fonctionnent les programmes de détection Utilisation dun programme minutéConseils pour les programmes Verrouillage des commandesArrêt de la sécheuse Pause ou remise en marcheProgrammes Témoins lumineuxCaractéristiques supplémentaires Retouche Cycle signal signal de programmeChangement des programmes, options et Modificateurs Grille de séchageJouets rembourrés ou oreillers Séchage sur grille Réglage Temp Durée Chandails en laineChaussures de tennis ou de toile Nettoyage de l’intérieur de la sécheuse Nettoyage de lemplacement de La sécheuseEntretien DE LA Sécheuse Nettoyage du filtre à charpieDéménagement Retrait de la charpie accumuléeChangement de l’ampoule d’éclairage Du tambour Absence de chaleur La sécheuse affiche un message codé DépannageFonctionnement de la sécheuse La sécheuse ne fonctionne pasTemps de programme trop court „ La sécheuse est-elle installée dans un placard?Résultats de la sécheuse „ Le conduit dévacuation a-t-il la longueur appropriée?Nos consultants vous renseigneront sur les sujets suivants Pour plus dassistancePour plus d’assistance Nos consultants fournissent de lassistance pourLa présente garantie limitée ne couvre pas Garantie DES Gros Appareils Ménagers MaytagW10057349A
Top Page Image Contents