Humminbird ICE 35, ICE 55, ICE 45 manual Thank YOU

Page 2

THANK YOU!

Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturingtop-quality,thoroughly reliable marine equipment.

Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikelyevent that your Humminbird®does requirerepairs,we offer an exclusiveService Policy - free of charge duringthe first two yearsafter purchase, and available at a reasonable rate after the two-year period. For complete details, see the Warranty section included in this manual.

We encourageyou to read this installationand operations manual carefully in order to get full benefit from all the featuresand applicationsof your Humminbird®product.

Contact our Customer Resource Center at either 1-800-633-1468 or visit our website at www.humminbird.com.

WARNING! Do not touch an active transducer during operation, as this may cause physical discomfort and may result in personal injury in the form of tissue damage. Handle the transducer only when the power to the fishfinder is off.

WARNING! This device should not be used as a navigational aid to prevent collision, grounding, boat damage, or personal injury. When the boat is moving, water depth may change too quickly to allow time for you to react. Always operate the boat at very slow speeds if you suspect shallow water or submerged objects.

WARNING! Disassembly and repair of this electronic unit should only be performed by authorized service personnel. Any modification of the serial number or attempt to repair the original equipment or accessories by unauthorized individuals will void the warranty.

WARNING! This product contains chemicals known to the State of California to cause cancer and/or reproductive harm.

Humminbird®and ICE Flasher Series™ are trademarkedby or registeredtrademarksof Humminbird®.

© 2008 Humminbird®,Eufaula AL, USA. All rights reserved.

ii

Page 1 Page 3
Image 2
Page 1 Page 3
Contents ICE 35, ICE 45, ICE Installation and Operations Manual Thank YOU Table of Contents Year Limited Warranty Humminbird Service Policy MaintenanceTroubleshooting Specifications Contact HumminbirdHOW Sonar Works Real Time SonarPage Page HOW ICE Flashers Work Installation Overview Slide one spring over each flat-headscrew and set aside ICE Flasher Series Base AssemblyAssembling the Transducer Storage Posts Repeat steps 2-5 for the second cable retentionarmInstalling the Handle Onto the Base Sliding in the Handle Assembling the Base and HandleAssembling the Control Head to the Base and Handle Repeat for the other sideCharging and Installing the Battery ICE Flasher Series AssemblyConnecting the Power Cable Slide the Battery Terminal Adapter over each spade terminal Spade Battery TerminalsAssembling the Portable Bag ICE 55 Only This procedure you willassemblethe transducerand float Transducer InstallationTesting the Transducer Prior to Installation Assembling the Transducer and FloatIce Layer Float Transducer Connecting the Transducer Cable Storing the Transducer Test and Finish the Installation Getting Started Using Your ICE Flasher Series Fishfinder WHAT’S on the Flasher Dial Powering UP the Control HeadSimulator Page WHAT’S on the Active Display ICE 45/55 only KEY FunctionsPOWER/RANGE Dial Selection Dial Range scales for the ICE 35 are shown belowZoom Gain Noise Rejection ICEPress the Beam key to toggle between 240 kHz and 455 kHz = 455 kHz, and Wide = 240 kHz Default = Wide ICE 45/55Beam Palette1 ICE 35/45/55 See Palette 1, Palette 2, or Palette 3 for more informationPalette2 ICE 55 Only Palette3 ICE 55 Only OrangeTarget ICE 55 Only Dual Mode KEY Functions Transducer Maintenance MaintenanceICE Flasher Series Maintenance Troubleshooting ICE Flasher Series Fishfinder Doesn’t Power UpYear Limited Warranty Humminbird Service Policy Returning Your Unit for Service Specifications Which your product was purchased Page Contact Humminbird By e-mail
Top Page Image Contents