ZOOM
When you use the zoom feature, your ICE Flasher Series™ Fishfinder will display a 2x magnified view of the area you choose. The zoomed view will display on the right side of the Flasher Dial between two blue lines. The normal view
will display on the left side of the Flasher Dial. (2x, Default = Off)
1.Press the Zoom key. Two blue zoom lines will display on the Flasher Dial, which indicate that your Flasher Dial is in zoom mode.
2.Turn the Selection dial to move the zoom lines to the area you want to magnify. The zoomed view will be shown on the right side of the Flasher Dial between the two blue zoom lines. On the ICE 45/55 Flasher,the tick marks shown on the Active Display show the zoom area.
•Exit zoom by pressing the Zoom key.
•Zoom can be dynamicallyupdated after making your initial selection by turning the Selection dial to a new location.
•When you are in zoom mode, in a 10m scale, 1/2 meters are represented by a dash (for example: 2— = 2 1/2)
NOTE: If you do not press the Selection dial within 5 seconds of pressing the Zoom key or turning the Selection dial, the zoom select function will time out.
Normal View (reading the full depth of the water column)
Zoom Line 
(lower range)
Flasher Dial in Zoom Mode
Zoom Line (upper range)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Zoom View | |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| Displays 2x | |
Tick Marks | Display | Magnification | ||||
Zoom Area | of Zoom Field | |||||
(ICE 45/55) |
|
| ||||
23