Humminbird ICE 45, ICE 55, ICE 35 manual Returning Your Unit for Service

Page 40

Returning Your Unit for Service

Before sending your unit in for repair,please contact the factory,either by phone or by email, to obtain a Repair Authorization Number for your unit.

NOTE: Please do not return your Humminbird® product to the store for service.

Please have your product model name and serial number available before calling the factory. If you contact the factory by e-mail, please include your product model name and serial number in the e-mail, and use Request for Repair Authorization Number for your e-mail subject header. You should include your Repair Authorization Number in all subsequent communications about your unit.

For IN-WARRANTY service, complete the followingsteps:

Obtain a Repair AuthorizationNumber from the Humminbird® Customer Resource Center.

Tag product with your name, street address, phone number and your assigned Repair Authorization Number.

Include a brief written description of the problem.

Include a copy of your receipt (to show proof and date of purchase).

Return product freight prepaid to Humminbird®, using an insured carrier with delivery confirmation.

For OUT-OF-WARRANTY service, complete the following steps:

Obtain a Repair AuthorizationNumber from the Humminbird® Customer Resource Center.

Include payment in the form of credit card number and expiration date, money order or personal check. Please do not send cash.

Tag product with your name, street address, phone number and your assigned Repair Authorization Number.

Include a brief written description of the problem.

Return product freight prepaid to Humminbird®, using an insured carrier with delivery confirmation.

36

Image 40
Contents ICE 35, ICE 45, ICE Installation and Operations Manual Thank YOU Table of Contents Maintenance TroubleshootingYear Limited Warranty Humminbird Service Policy Specifications Contact HumminbirdHOW Sonar Works Real Time SonarPage Page HOW ICE Flashers Work Installation Overview ICE Flasher Series Base Assembly Assembling the Transducer Storage PostsSlide one spring over each flat-headscrew and set aside Repeat steps 2-5 for the second cable retentionarmInstalling the Handle Onto the Base Sliding in the Handle Assembling the Base and HandleAssembling the Control Head to the Base and Handle Repeat for the other sideConnecting the Power Cable ICE Flasher Series AssemblyCharging and Installing the Battery Slide the Battery Terminal Adapter over each spade terminal Spade Battery TerminalsAssembling the Portable Bag ICE 55 Only Transducer Installation Testing the Transducer Prior to InstallationThis procedure you willassemblethe transducerand float Assembling the Transducer and FloatIce Layer Float Transducer Connecting the Transducer Cable Storing the Transducer Test and Finish the Installation Getting Started Using Your ICE Flasher Series Fishfinder Simulator Powering UP the Control HeadWHAT’S on the Flasher Dial Page WHAT’S on the Active Display ICE 45/55 only KEY FunctionsPOWER/RANGE Dial Selection Dial Range scales for the ICE 35 are shown belowZoom Gain Noise Rejection ICEBeam = 455 kHz, and Wide = 240 kHz Default = Wide ICE 45/55Press the Beam key to toggle between 240 kHz and 455 kHz Palette1 ICE 35/45/55 See Palette 1, Palette 2, or Palette 3 for more informationPalette2 ICE 55 Only Palette3 ICE 55 Only OrangeTarget ICE 55 Only Dual Mode KEY Functions ICE Flasher Series Maintenance MaintenanceTransducer Maintenance Troubleshooting ICE Flasher Series Fishfinder Doesn’t Power UpYear Limited Warranty Humminbird Service Policy Returning Your Unit for Service Specifications Which your product was purchased Page Contact Humminbird By e-mail