Baldor MIN1853 manual Section Setup, Procedure Format Definition

Section 5

Setup

Overview	There are two ways to setup the parameters: use the keypad or use Intelliware
	serial communications software. The procedures presented in this section allow
	LinStep+ to be configured using the keypad (LXKP). If you are not familiar with
	the operation of the keypad, please refer to Section 4 of this manual. To ensure
	that LinStep+ is correctly configured, follow all the procedures so that important
	parameters are not overlooked.
	Intelliware software (serial communications) users can refer to this section for
	definition of the configuration parameters. The Windows dialog boxes follow the
	keypad menu structure very closely. Details of Intelliware software are provided in
	MN1855.
	Procedure Format Definition
	The 2–character ASCII command appears in brackets next to the keypad
	command. This is the Intelliware software command. Configuring LinStep+ to a
	specific application requires customizing a number of software parameters to
	match the mechanics of the system. These parameters include motor, encoder,
	distance, acceleration and velocity scaling, I/O, jog, home, and serial
	communication.

Sample format of a procedure description:

Parameter being Configured

ASCII Command (Intelliware)

Definition [ ID ]

EDIT > SETUP > I/O > INPUTS

Keypad

StepsValue: Range:

Factory Setting

and range of adjustment

Keypad Display

IN1: unassigned:

BBBBKREJ

Pressing the EDIT key displays a set of sub–menus.

Action		Display		Comments
Press EDIT key				Select a sub–menu, press F1 (PROG),
		–↑EDIT↓ –
				F2 (SETUP), or F3 (POS).
	PROG	SETUP	POS
Press F2 (SETUP) key for more				Select a sub–menu, press F1 (PROG),
		–↑SETUP↓ –
sub menu selections.				F2 (RS232), or F3 (MISC).
	PROG	RS232	MISC
Press ↓ key for more sub menu				Select a sub–menu, press F1 (I/O), F2
		–↑SETUP↓ –
selections.				(JOG), or F3 (HOME).
	I/O	JOG	HOME
Press ↓ key for more sub menu				Select a sub–menu, press F1
		–↑SETUP↓ –
selections.				(MOTOR), F2 (ENC), or F3 (MECH).
	MOTOR	ENC	MECH

MN1853 Setup 5-1