Baldor MIN1853 manual Value Units, MS27,COUNT

MS	Message to Display
	Value:	N/A
	Units:	N/A

Range: n=1–40 characters (20 on each line)

syntax – MS,“”returns to the initial runtime display MSn,“”

MSn,“user text” MSn,(variable)

MS allows messages to be displayed on the keypad’s display. Messages are usually to prompt for operator input, display function key prompts, or as a diagnostic tool.

MS,“”can be used to restore the initial axis position and I/O display during program execution. MSn,“”clears the display from the n th character to the end of message. MSn,“user text” prints user text beginning at the n th character. MSn,(variable) writes the value of the variable beginning at the n th character. These variations to MS all disable the initial position and I/O display until program execution stops. MS,“”can be used to restore the initial axis position and I/O display during program execution.

Examples:
MS1,“”	Clears the Display.
MS3,“Part Count”	Writes string beginning at character 3, top line.
MS27,(COUNT)	Displays the value of the variable (COUNT), beginning at position number
	27 (7th character, 2nd row).

This keypad programming template shows the relationship of the each character position to the location of the function keys. This will help you align messages on the display. A larger version is located in the back of this manual and can be photo copied for programming use.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

M S 2 7

,(

C O U

N T )

Display

Lines

21	22	23	24	25	26	27	28	29	30	31	32	33	34	35	36	37	38	39	40
		FK1							FK2							FK3

6-18 Keypad Programming MN1853