Roland VC-2 owner manual Wave Screen, Carrier Screen for Processor~

						Creating/Editing Patches (Patch mode)
Parameter	Value				Explanation
Time	0–127				ifies the time over which the pitch	Wave Screen
					When portamento is used, this spec-
					will change. Higher settings will
					cause the pitch change to the next	In the case of a patch whose patch algorithm is Keyboard~,
					note to take more time.	you can access the Wave screen by touching <Wave> in the
BENDER						lower part of the screen.
Parameter	Value		Explanation			OSC
Range	0–48		Specifies the degree of pitch change in
			semitones when the Pitch Bend lever is all
			the way left/right. For example if this is			WAVE
			set to “48” and you move the pitch bend
			lever all the way to the left, the pitch will
			fall 4 octaves. If this parameter is set to
						Parameter	Value		Explanation
			“12,” the pitch will rise one octave when
						Wave	—		Selects a preset or imported wave.
			the pitch bend lever is moved to the right-
			most position.			Tempo	OFF,		Specifies whether the wave will be
						Sync	ON		sounded in sync with the tempo
									clock (ON) or not (OFF).
						Key Mode	NORMAL,		NORMAL: Begin sounding when
Carrier Screen for Processor~
							ALWAYS		you press a key, and stop sounding
Patch Algorithms									when you release the key.
									ALWAYS: Begin sounding when
									you first press a key, and continue
									sounding.
TVA
Level						VARI
						Parameter	Value	Explanation
Parameter	Value		Explanation
						Pitch	-63–	Adjusts the pitch.
Level	0–127		Specifies the volume of the patch.
							+63
ModDepth	-63–		Adjusts the volume of the patch by the
						ModDepth	-63–	Adjust the pitch using the controller as-
	+63		controller assigned by Controller (p. 31).
							+63	signed by Controller (p. 31).
						Time	-63–	This sets the range of change in playback
Pan							+63	speed (time).
						ModDepth	-63–	Adjust the range of change in playback
							+63	speed using the controller assigned by
Parameter		Value		Explanation
								Controller (p. 31).
Pan		L64–		Specifies the pan of the patch. “L64” is
						Formant	-63–	This sets the range of change in vocal qual-
		0–63R		far left, “0” is center, and “63R” is far
							+63	ity (formant).
				right.
						ModDepth	-63–	Adjust the range of change in vocal quali-
ModDepth		-63–		Adjusts the pan of the patch by the con-
							+63	ty using the controller assigned by Con-
		+63		troller assigned by Controller (p. 31).
								troller (p. 31).
						TVA
						Parameter	Value	Explanation
						Level	0–127	Specifies the volume of the wave.
						ModDepth	-63–	Adjust the volume of the wave using the
							+63	controller assigned by Controller (p. 31).

29