Roland VC-2 owner manual Analog Phaser, Step Flanger

Effects List

			23: Analog Phaser
Parameter	Value	Description
Phase	0–180 deg	Specifies the spaciousness of the	This effect features two analog-type phasers arranged in
		flanger sound.
			parallel, making it stereo compatible. The sound as it
Feedback	NORMAL,	Specifies the input destination to
			cyclically drifts in and out of phase is added to the source
Mode	CROSS	which the flanger sound will be re-
			sound, creating the modulation with the characteristic of
		turned.
		NORMAL: The left flanger sound	phasers.
		will be returned to the left input,
		and the right flanger sound to the	Parameter	Value	Description
		right input.
			Shift Mode	4STAGE,	Sets the number of stages in the
		CROSS: The left flanger sound will		8STAGE	phase shift circuit (four (4STAGE) or
		be returned to the right input, and			eight (8STAGE)).
		the right flanger sound to the left			Setting this to eight stages (8STAGE)
		input.			increases the number of the frequen-
Feedback	-98– +98 %	This setting makes the flanging			cy points that sound is canceled,
		sound of each of right and left			giving a sharper effect.
		channels return to the input of the		Level
		opposite channel. Negative (-) set-			4 stage
		tings will invert the phase.
		* When the Feedback Mode is set to
		NORMAL, this setting will be ig-
		nored.				Freq.
Cross Mix	-100– +100	This setting makes the flanging		Level
Level		sound from each of the right and			8 stage
		left channels mix it with the flang-
		ing sound of the opposite channel.
		Negative (-) settings will invert the
		phase.				Freq.
Ps Low Freq	50–4000 Hz	Frequency of the low range
			Center Freq	0–127	Sets the center frequency to which
Ps Low Gain	-15– +15 dB	Gain of the low range			the phaser effect is applied.
Ps Hi Freq	2000–20000 Hz	Frequency of the high range			Increasing this value moves the ef-
					fect point of the phaser into higher
Ps Hi Gain	-15– +15 dB	Gain of the high range
					frequency ranges.
22: Step Flanger			Resonance	0–127	Amount of feedback
					Increasing this value gives a more
					distinctive sound to the effect.
This is a flanger in which the flanger pitch changes in steps.			LFO 1/2	0.02–5.00 Hz,	Sets the rate of the swelling sound.
The speed at which the pitch changes can also be specified in			Rate	note
terms of a note-value of a specified tempo.			LFO 1/2	0–127	Specifies the depth of modulation.
			Depth
Parameter	Value	Description	LFO 1/2	NORM, INV	Sets the phase of both left and right
Pre Dly Time	0–50.0 ms	Specifies the time delay from the	Phase		swelling.
		original sound until the flanger			NORM: The left and right phase will
		sound is heard.			be the same.
Rate	0.05–10.0 Hz,	Specifies the modulation frequen-			INV: The left and right phase will be
					opposite.
	note	cy of the flanger sound.
Depth	0–127	Specifies the modulation depth of
		the flanger sound.
Feedback	-98– +98 %	Adjusts the proportion of the
		flanger sound that is fed back into
		the effect. Negative (-) settings will
		invert the phase.
Phase	0–180 deg	Specifies the spaciousness of the
		flanger sound.
Step Rate	0.05–10.0 Hz,	Specifies the frequency of pitch
	note	change.
Flanger Level	0–127	Volume of the flanger sound
Ps Low Freq	50–4000 Hz	Frequency of the low range
Ps Low Gain	-15– +15 dB	Gain of the low range
Ps Hi Freq	2000–20000 Hz	Frequency of the high range
Ps Hi Gain	-15– +15 dB	Gain of the high range

52