Roland VC-2 owner manual Digital Chorus, Analog Delay→Chorus, Delay Pan Type

Effects List

								17: Digital Chorus
Parameter		Value			Description
Balance		DRY100:0WET–			Volume balance between the di-			This is a stereo chorus or flanger. Equalizers are provided
		DRY0:100WET			rect sound (DRY) and the delay
								before (Pre) and after (Post) the chorus (or flanger).
					sound (WET)
Delay Pan Type								Parameter	Value	Description
								Mode	CHORUS,	Selects either chorus or flanger.
									FLANGER
Values	Dly 1		Dly 2		Dly 3	Dly 4	Dly 5
								Rate	0.05–10.0 Hz,	Sets the cycle for the chorus or
1	L63		L32		0	32R	63R
									note	flanger sound undulations.
2	L63		32R		L32	63R	0
								Depth	0–127	Adjusts the depth of modulation
3	L63		63R		L32	32R	0
										for the chorus or flanger.
4	32R		L32		L63	0	63R
								Phase	0–180 deg	Specifies the spaciousness of the
5	63R		0		L63	L32	32R			chorus or flanger sound.
								Pre Low Freq	50–4000 Hz	Frequency of the low range (Pre)
6	L32		32R		L63	63R	0
								Pre Low Gain	-15– +15 dB	Gain of the low range (Pre)
7	0		63R		L63	32R	L32
								Pre Hi Freq	2000–20000 Hz	Frequency of the high range (Pre)
8	0		63R		L32	32R	L63
								Pre Hi Gain	-15– +15 dB	Gain of the high range (Pre)
9	0		32R		L32	63R	L63
								Pre Dly Time	0–50.0 ms	Adjusts the delay time from the di-
10	63R		32R		0	L32	L63
										rect sound until the chorus or
16: Analog Delay→Chorus										flanger sound is heard.
								Feedback	-98– +98 %	Adjusts the proportion of the cho-
This effect reproduces the sound of the BOSS CE-1 Chorus										rus or flanger sound that is fed
										back into the effect. Negative (-)
Ensemble. To reproduce the sound of the unit at the time, a										settings will invert the phase.
monaural analog-type delay is first inserted in series.								Xover Low-	50–4000 Hz	Attenuates the effect in the range
								Freq		below the specified frequency.
Parameter		Value		Description				Xover Low	-36–0 dB	Specifies how greatly the low
Dly Sw		OFF, ON		Turns the delay on/off.				Gain		range will be attenuated.
Dly Repeat		0–127		Corresponds to the delay time in a de-
								Xover HiFreq	2000–20000 Hz	Attenuates the effect in the range
Rate				lay effects.						above the specified frequency.
Dly Intensity		0–127		Corresponds to the feedback setting in
								Xover Hi	-36–0 dB	Specifies how greatly the high
				a delay effects.				Gain		range will be attenuated.
Dly Level		0–127		Sets the volume of the delay sound.
								Modulation	0–127	Volume of the chorus or flanger
Chorus Sw		OFF, ON		Turns chorus or vibrato on/off.				Level		sound.
								Ps Low Freq	50–4000 Hz	Frequency of the low range (Post)
Chorus Mode		CHORUS,		Switches the sound between chorus
		VIBRATO		and vibrato modes.				Ps Low Gain	-15– +15 dB	Gain of the low range (Post)
Chorus Inten-		0–127		When Chorus Mode is CHORUS, this
								Ps Hi Freq	2000–20000 Hz	Frequency of the high range (Post)
sity				sets the pitch vibrato speed.
								Ps Hi Gain	-15– +15 dB	Gain of the high range (Post)
Vibrato		0–127		When Chorus Mode is VIBRATO, this
Depth				sets the pitch vibrato depth.
Vibrato Rate		0–127		When Chorus Mode is VIBRATO, this
				sets the pitch vibrato speed.
Chorus Out		MONO,		Switches the output format (mono/
Mode		ST-1, ST-2		stereo).
				MONO: Output is monaural.
				ST-1: Chorus sound of the pitch vibra-
				tion which phase is inverted between
				left and right is mixed with the source
				sound. This is a broader chorus, with
				a weaker feeling of placement.
				ST-2: The left output contains the
				source sound, and the right side has
				the wavering chorus sound.

50