Creating/Editing Patches (Patch mode)
Effect Screen
You can go to the top screen by touching <Effect> in the lower part of the screen.
Routing
MFX (MFX On/Off Switch)
Switches MFX on and off.
Value: 
(OFF), 
(ON)
MFX Type
Use this parameter to select from among the 41 available MFX. For details on MFX parameters, refer to “MFX Parameters” (p. 43).
Value: 00
MFX Master Level
Adjusts the volume of the sound that has passed through the MFX.
Value: 0–127
MFX To CHO (MFX Chorus Send Level)
Adjusts the amount of chorus for the sound that passes through MFX. If you don’t want to add the Chorus effect, set it to “0.”
Value: 0–127
MFX To REV (MFX Reverb Send Level)
Adjusts the amount of reverb for the sound that passes through MFX. If you don’t want to add the Reverb effect, set it to “0.”
Value:
CHO (Chorus On/Off Switch)
Switches chorus on and off.
Value: 
(OFF), 
(ON)
CHO Type (Chorus Type)
Use this parameter to select from among the 8 available chorus. For details on chorus parameters, refer to “Chorus Parameters” (p. 61).
Value: 00
CHO Master Level (Chorus Master Level)
Adjusts the volume of the sound that has passed through chorus.
Value: 0–127
CHO To REV (Chorus Reverb Send Level)
Adjusts the amount of reverb for the sound that passes through chorus. If you don’t want to add the Reverb effect, set it to “0.”
Value:
REV (Reverb On/Off Switch)
Switches reverb on and off.
Value: 
(OFF), 
(ON)
REV Type (Reverb Type)
Use this parameter to select from among the 14 available reverb. For details on reverb parameters, refer to “Reverb Parameters” (p. 62).
Value: 00
REV Master Level (Reverb Master Level)
Adjusts the volume of the sound that has passed through reverb.
Value:
32