Pioneer DEH-1400 Using the equalizer, Adjusting loudness, Recalling equalizer curves

Page 12

Audio Adjustments

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

Recalling equalizer curves

There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display	Equalizer curve

SBASS	Super bass

PWRFL	Powerful

NTRL	Natural

VOCAL	Vocal

CSTM	Custom

FLAT	Flat

•CSTM is an adjusted equalizer curve that you create.

•When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.

Press EQ to select the equalizer.

•If the equalizer has been previously set to an equalizer curve other than PWRFL then the title of that previously selected equalizer curve will be displayed, such as SBASS, NTRL, VOCAL,

CSTM, or FLAT.

Adjusting equalizer curves

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CSTM.

1Press AUDIO to select the equalizer mode. Press AUDIO until EQ appears in the display.

2Select the band you want to adjust with

2/3.

L (low) —M (mid) —H (high)

3Press 5 or ∞ to adjust the equalizer curve. Each press of 5 or ∞ increases or decreases the equalizer curve respectively.

• +6 – –6is displayed as the equalizer curve is increased or decreased.

• The actual range of the adjustments are differ- ent depending on which equalizer curve is selected.

Note

•If you make adjustments when a curve other than CSTM is selected, the newly adjusted curve will replace the previous curve. Then a new curve with CSTM appears on the display while selecting the equalizer curve.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1 Press AUDIO to select LOUD.

Press AUDIO until LOUD appears in the display.

11En

Image 12

Contents DEH-1400 English Français EspañolContents English To establish a safe levelAfter-sales service for Pioneer products PrecautionsBefore You Start About this unitProtecting your unit from theft Removing the front panelAttaching the front panel Place the front panel flat against the headWhat’s what EQ button∞/2/3 buttons Band buttonPower ON/OFF To perform manual tuning, press 2 or 3 with quick presses TunerStoring and recalling broadcast frequencies Tuning in strong signals Press LOCAL/BSM to turn local seek tuning onBuilt-in CD player Storing the strongest broadcast frequenciesPausing CD playback Playing tracks in a random orderRepeating play Audio Adjustments Introduction of audio adjustmentsUsing balance adjustment Using the equalizer Adjusting loudnessAdjusting equalizer curves Recalling equalizer curvesAdjusting source levels Front image enhancer FIESetting the time Setting the time display on or offOther Functions Press Clock to select the time displayAdditional Information CD player and careCD-R/CD-RW discs Understanding built-in CD player error messages Message Cause ActionSpecifications Table des matières Cher Client Quelques mots sur ce mode d’emploi Service après-vente des produits PioneerAvant de commencer Quelques mots sur cet appareilProtection de l’appareil contre le vol Dépose de la face avantPose de la face avant Appuyez sur Detach pour libérer la face avantDescription de l’appareil Mise en service de l’appareil Mise hors service de l’appareilSyntoniseur Choix d’une sourceUtilisez Volume pour régler le niveau sonore Mise en mémoire et rappel des fréquences des stationsPour choisir le syntoniseur, appuyez sur RemarqueLecteur de CD intégré Accord sur les signaux puissantsEcoute d’un CD Répétition de la lecture Pause de la lecture d’un CDEcoute des plages musicales dans un ordre quelconque Réglages sonores Introduction aux réglages sonoresRéglage de l’équilibre sonore Utilisation de l’égaliseur Rappel d’une courbe d’égalisationRéglage des courbes d’égalisation Réglage de la correction physiologiqueAccentuation de l’image sonore avant FIE Réglage du niveau sonore de la sourceFrançais PrécautionAutres fonctions Réglage de l’heureAffichage ou non de l’heure Informations complémentaires Soins à apporter au lecteur deDisques CD-R/CD-RW Informations complémentaires Signification des messages d’erreur du lecteur de CD intégréCaractéristiques techniques GénéralitésLecteur de CD Syntoniseur FMContenido Antes de empezar Acerca de este productoAcerca de este manual EspañolServicio de posventas para productos Pioneer PrecaucionesProtección del producto contra robo Colocación del panel delanteroExtracción del panel delantero ImportanteQué es cada cosa Encendido y Apagado Sintonizador Almacenaje y llamada de frecuenciasPresione Band para seleccionar una banda NotaLector de CD incorporado Sintonía de señales fuertesAlmacenaje de las frecuencias de radio más fuertes Reproducción de un CDLector de CD incorporado Reproducción de pistas en un orden aleatorioRepetición de reproducción Pausa de la reproducción de CDAjustes de audio Introducción a los ajustes de audioUso del ajuste del equilibrio Visualización AudioUso del ecualizador Ajuste de la sonoridadLlamada de las curvas de ecualización Ajuste de las curvas de ecualizaciónMejorador de imagen delantera FIE Ajuste de los niveles de la fuenteOtras funciones Ajuste de la horaActivación y desactivación de la visualización del reloj Ajuste la hora correcta con 5/∞Informaciones adicionales Lector de CD y cuidadosDiscos CD-R/CD-RW Mensaje Causa Acción Especificaciones General Lector de CDSintonizador FM Sintonizador AMPage Page Pioneer Corporation