Pioneer DEH-1400 operation manual Tuner, Storing and recalling broadcast frequencies

Tuner

1Press SOURCE to select the tuner.

2Use VOLUME to adjust the sound level. When you press VOLUME up/+, the volume is raised and when pressed down/–, the volume is lowered.

3Press BAND to select a band.

Press BAND until the desired band is displayed,

FM1, FM2, FM3 for FM or AM.

4To perform manual tuning, press 2 or 3 with quick presses.

The frequencies move up or down step by step.

5To perform seek tuning, press and hold 2 or 3 for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

• You can cancel seek tuning by pressing either 2 or 3 with a quick press.

• If you press and hold 2 or 3 you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons.

Note

•When the frequency selected is being broad- cast in stereo the STEREO () indicator will light.

Storing and recalling broadcast frequencies

If you press any of the PRESET TUNING buttons you can easily store up to six broadcast frequen- cies for later recall with the touch of a button.

When you find a frequency that you want to store in memory press a PRESET TUNING but- ton and hold until the preset number stops flashing.

The number you have pressed will flash in the PRESET NUMBER indicator and then remain lit. The selected radio station frequency has been stored in memory.

The next time you press the same PRESET TUN- ING button the radio station frequency is recalled from memory.

Notes

•Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory.

•You can also use 5 and ∞ to recall radio sta- tion frequencies assigned to PRESET TUNING buttons.

7En