TransChorusª | Peavey TransChorus 210 specs

ENGLISH

TransChorusª 210

Congratulations on your purchase of the Peavey TransChorusª 210. The TransChorusª 210 combines PeaveyÕs patented TransTube¨ tube emulation with the latest developments in chorus design. If you havenÕt played through a Peavey TransTube¨ amp you are in for a real treat. Transtube¨ technology produces a tone so similar to tubes that itÕs deceiving to even the most experienced ears. PeaveyÕs chorus amps have been top sellers for years, offering an array

of chorus sounds varying from a slight hint to a heavy swirl.

Other features found on the TransChorusª 210 are reverb, three distinct channels, stereo power amp, two sets of equalization, and PeaveyÕs T. Dynamics¨ power amp circuitry. Pack all that into a compact 210 cabinet, and you have one very portable and versatile combo-amp capable of answer- ing various playing demands. We know you are anxious to start playing, so weÕve included a ÒQuick StartÓ section and a ÒRecommended SettingsÓ section. These are certain to get you on your way. However, it is important that you read the safety precautions first. Scan through this manual and locate these safety icons:

Each safety icon is followed by a warning. Read that warning carefully before continuing on. Once you have read all of the warnings, refer to the ÒQuick StartÓ section below if you so desire. It is recommended that you read this manual in its entirety to fully understand the functions of each feature.

Quick Start Ñ I just want to play!

The following section takes a Òjump in and get your feet wetÓ approach. If any part seems confusing, refer to the more detailed sections that follow.

Step 1. Insure that you have read and understand all safety warnings noted throughout the manual. It is imperative that you follow these precautions for the safety of yourself and your amp.

Step 2. With the amp turned off plug the power cord into the proper voltage supply indicated on the back of the unit near the cord retainer.

Step 3. Plug your guitar into either the High or Low Gain input and turn all knobs counter clockwise to their Ò0Ó position.

Step 4. Using the ÒRecommended SettingsÓ on page 7, find the type of tone that most closely resembles the tone you wish to obtain.

Step 5. Set the knobs on the front of the unit to match the setting you have selected.

Step 6. Plug your footswitch into the Remote Switch jack on the rear of the unit.

Step 7. Turn your guitar volume down and turn the amp on using the power switch on the back of the unit.

Step 8. Gradually turn the volume of your guitar all the way up or until you are comfortable with the level/tone.