Graco 3A1214B important safety instructions List of Models see, Important Safety Instructions

Page 1

Operation

	RoadLazer™ RoadPak™	3A1214B
	Line Striping System	3A1214B
	Line Striping System	ENG

- For the Application of Road Marking and Reflective Coatings -

- For Professional Use Only -

List of Models (see page 2)

2900 psi (20 MPa, 200 bar) Maximum Working Pressure

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

ti15835a

Image 1

Contents List of Models see Important Safety InstructionsComplete Assemblies ModelsFire and Explosion Hazard Equipment Misuse Hazard Introduction Introduction and General InformationGeneral Information Component Identification Component Function Charge Battery SetupGun Arm Bracket Mount Single Hitch Mounting Bracket 24G626 Installation OptionFilter Orientation Narrow Orientation RoadPak Mounting Bracket 24G627 Installation Option21 in. 25 Cm 63 cm Wide Orientation Gun Arm Installation 24G628, 24G629 Slide Beam Installation 24G630705 Hose Routing to Pumps and Tanks Hose Connection Hose RoutingElectrical Cable Connections Install and Align Front Mechanical Guidance System Optional Install Front Pointer InstructionsInstall and Align Video Guidance System Optional Install Winch Kit OptionalOperation Pressure Relief ProcedureRPS 2900 Pump Fluid Pressure Relief Bead System Pressure ReliefInitial Settings Set Up Slide Beam and Gun ArmLoad Reflecting Materials Prepare System to PaintSafe Range cold Select/Prime Pumps Start EnginePrime Guns Begin to SprayTurn on Bead System Flushing the System Perform Pressure Relief Procedure, seeOperation RoadLazer in Storage Position Securing Gun Arm for TransportationTechnical Data Graco Information Graco Standard Warranty