Graco 3A1214B Securing Gun Arm for Transportation, RoadLazer in Storage Position

Operation

Securing Gun Arm for

Transportation

NOTE: Never transport the RoadLazer while the paint gun ball valves are open, the system is under pressure, and the engine is running, as this could cause damage to components.

1. Unlock gun arm red-handled clamp on slide beam.

ti16425a

2.Lift gun arm up from ground, and push in to center of RoadLazer.

ti16422a

3.Pull gun arm hitch pin out of frame.

4.Put gun arm hitch pin back in frame and secure with clip.

ti15837a

5.Unlock two red-handled clamps and center the slide beam on the vehicle.

ti16923a

6.Lock three red-handle clamps to secure the slide beam and gun arm.

ti16915a

ti15954a

RoadLazer in Storage Position

26 3A1214B