Graco 3A1214B important safety instructions Introduction and General Information

Introduction and General Information

Introduction and General Information

Introduction

This manual and those listed below provide pre-setup requirements, parts lists, setup, operation, and mainte- nance instructions for the RoadLazer system. This man- ual includes instructions for a 2-pump system. For

1-pump systems, all parts remain the same with the exception of plugged ports for missing pumps and hoses.

General Information

The RoadLazer is mounted to a vehicle and is used to stripe up to two stripes in one or two colors with glass beading.

The RoadLazer consists of a Programmable Skipline Controller, Displacement Pumps, two Paint Spray Guns, and two Bead Spray Guns.

Front Guidance System

The Front Mechanical Guidance System provides the user with a pointer for alignment on either the left or right side of the vehicle.

Video Guidance System™ (optional)

The Video Guidance System provides the user with video of a bore sight view for alignment on either the left or right side of the tow vehicle. The system consists of a 9 in. monitor, interfacing cables, video camera and mounting bracket.

RPS 2900 Hydraulic Pumps

The RPS 2900 Hydraulic Pump supplies paint to the spray guns. There are two displacement pumps. Two displacement pumps allows the user to have a two-color system.

Programmable Skipline Controller

The Programmable Skipline Controller consists of the control box and a 30 ft cable. It is the main control for the RoadLazer system and turns the spray guns and acces- sories on and off.

Paint Spray Guns

The Paint Spray Guns are pneumatically triggered to spray paint stripes when commanded by the Program- mable Skipline Controller.

Bead Spray Guns

The Bead Spray Guns are pneumatically triggered to spray reflective materials when commanded by the Pro- grammable Skipline Controller.

3A1214B 5