Setup
Install Front Pointer Instructions
1.Locate an area on the vehicle to mount the Road- Pak pointer system that will allow the user to see the indicator rod from the driving position or with the help of the Road View Camera System.
ti16408a
2.If needed, drill two 9/16 in. holes in the desired loca- tion.
3.Assemble mounting bracket (355) to desired loca- tion with bolt (359), washer (360), and nut (361).
361
5.Slide support bar (351) through brackets (355) and tighten fasteners to secure in place.
355
351
ti17000a
6. Assemble extension clamp to support bar.
ti16925a
7.Insert indicator rod (362) into guide extension arm (352) and secure in place with knob(354).
8.Adjust the indicator rod by loosening extension clamps and sliding the guide extension arm (352) to desired position. Secure by tightening knob (354).
360
355
359 | ti16927a |
4.Hand tighten lock bar (6) to mounting bracket (355) with bolts (357) and nuts (358).
358
6
357
ti16926a
Install and Align Front Mechanical Guidance System (Optional)
See Guidance System manual.
Install and Align Video Guidance System (Optional)
See RoadView Camera System manual.
Install Winch Kit (Optional)
See Winch Kit manual.
18 | 3A1214B |