Graco 3A1214B important safety instructions Wide Orientation

Setup

Wide Orientation

ti16657a

1.Bolt brackets (316) to the RoadPak in four locations with bolts (312), washers (307), and nuts (315). It is ideal to locate the brackets as far apart as possible to provide optimal support. The mounting location of the brackets will depend on where the RoadPak is mounted on the vehicle.

315

316

307

ti16786a 318

2.Slide the RoadPak mounting brackets (304) through the cut out holes in the frame and hand-tighten the mounting arms to the brackets with bolts (312), washers (307), and nuts (315).

316

304

ti16911a

315

307

ti16913a 312

3.Install the height adjustment bracket to the RoadPak mounting arms (303).

315

307312

303

ti16921a

4.Use wrench to tighten all bolts to lock into place (torque to 28 ft-lb).

ti16924a

12 3A1214B