Setup
RoadPak Mounting Bracket (24G627) Installation (Option 2)
ti16441a
NOTE: Cutting the RoadPak mounting arms and bolting them through the bed to the frame of the vehicle is an option in addition to the following mounting techniques:
ti16661a
Narrow Orientation
ti16656a
1.Slide the RoadPak mounting arms (304) between the two fork lift channels in the frame.
304
ti16917a
2.Depending on where the RoadPak is located on the vehicle determines which holes to bolt through on the RoadPak frame. There are 8 possible mounting holes for each mounting arm. Fasten to at least two holes on each side.
ti16659a
3.
312 307
315
ti16660a
10 | 3A1214B |