Sear Station Burner Manual Ignition

SEAR STATION® IGNITION & USAGE

SEAR STATION® BURNER MANUAL IGNITION

mDANGER

Failure to open the lid while igniting the barbecue’s burners, or not waiting five minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flare-up which can cause serious bodily injury or death.

The Sear Station® burner, has an on or off control setting.. To ignite the Sear Station® burner you must first ignite the two adjacent main burners..

Adjacent Main Burner Snap Ignition

Note: Each main burner control knob snap igniter creates a spark from the igniter electrode to the burner lighting tube.You generate the energy for the spark by pushing in the control knob and turning to START/HI.This will ignite each individual burner.

A)Open the lid (1)..

B)Verify each adjacent Sear Station® main burner is lit by visual inspection of a flame (2)..

C)Put match in the match holder and strike match..

mWARNING: Do not lean over open barbecue.

D)Insert match holder and lit match down through cooking grates and Flavorizer® bars to ignite the Sear Station® burner (3)..

E)Push the Sear Station® control knob in and turn to the ON position (4)..

mWARNING: If the burner does not light, turn the burner control knob to OFF and wait five minutes to let the gas clear before you try again.

Note: See “MAINTENANCE” for burner removal and cleaning procedure. ◆

TO EXTINGUISH

Push in and turn each burner control knob clockwise to OFF position.. Turn gas supply off at the source.. ◆

USING THE SEAR STATION®

Your Weber® gas barbecue includes a sear burner for searing meats such as steak, poultry parts, fish, and chops)..

Searing is a direct grilling technique which browns the surface of the food at a high temperature.. By searing or browning both sides of the meat, you will create a more desirable flavor by caramelizing the food surface.. Searing will also enhance appearance of the meat with sear marks from the cooking grates.. This, along with the contrast of textures and flavors, can make food more interesting to the palate..

The Sear Station® burner has an on or off control setting that works with the two adjacent main burners.. With the sear and adjacent burners you can effectively sear meats while using other cooking areas for grilling with moderate heat..

Before searing food you should turn all of the main burners on HI for 15 minutes to preheat the grill.. Note: Always grill with the lid closed to allow for maximum heat and to avoid flare-ups..

Once the grill is preheated, turn the outer burners off or down to low.. Leave the center two burners on HI and ignite the Sear Station® burner..

Place the meat directly over the Sear Station®.. You will sear each side anywhere from

1 to 4 minutes, depending on the type of meat and thickness.. You may turn the food a quarter turn to make crossing sear marks (1) before you sear the other side in the same manner..

Once you are done searing the meat you can finish grilling by moving the meat to a more moderate heat over the outside burners to achieve the desired doneness..

As you gain experience in using your Sear Station®, we encourage you to experiment with different searing times to find results that work best for your taste.. ◆

The grill illustrated may have slight differences than the model purchased.

6 BURNER

SEAR METHOD

Food is placed in the area of intense heat between the lit burners..