Weber 56568 manual 115, Removing The Sear Station Burner

MAINTENANCE

Removing The Sear Station® Burner
To remove the Sear Station Burner®, pull the burner tube toward you.. This removes it		71	82	115
from the burner tube notch (7).. Then rotate the tube clockwise (8), taking care to rotate
the burner tube so that the screw at the end of the tube (9) fits through the notch in the
heat shield opening (10). When the burner tube is free, remove it from the cookbox (11)..
A)	To reinstall the manifold assembly, reverse steps for “Removing Control Panel” as
	previously described..
m CAUTION: The burner openings (12) must be positioned
	properly over the valve orifices (13). Make sure the opposite		39
	end of the burner tubes (14) properly align into the slots on
	the backside of the cookbox. Check proper assembly before
	fastening manifold in place.			104
m WARNING: After reinstalling the gas lines, they should be
	leak checked with a soap and water solution before using
	the grill. (See “CHECK FOR GAS LEAKS.”) ◆

132 12

143

40