Trace Oxygen Analyzer | Operation 4 | |
|
|
|
|
|
|
|
|
|
4.3.3.1Entering the Password
To install a new password or change a previously installed password, you must key in and ENTER the old password first. If the default password is in effect, pressing the ENTER button will enter the default TETAI pass- word for you.
Press System to enter the System mode.
TRAK/HLD
PSWD Logout More
Use the < > arrow keys to scroll the blinking over to PSWD, and press Enter to select the password function. Either the default TETAI password or
AAAAAplace holders for an existing password will appear on screen depending on whether or not a password has been previously installed.
T E T A I
Enter PWD
or
A A A A A
Enter PWD
The screen prompts you to enter the current password. If you are not using password protection, press Enter to accept TETAI as the default password. If a password has been previously installed, enter the password using the < > arrow keys to scroll back and forth between letters, and the Δ∇ arrow keys to change the letters to the proper password. Press Enter to enter the password.
If the password is accepted, the screen will indicate that the password restrictions have been removed and you have clearance to proceed.
PSWD Restrictions
Removed
In a few seconds, you will be given the opportunity to change this password or keep it and go on.
Change Password? <ENT>=Yes <ESC>=No
Press Escape to move on, or proceed as in Changing the Password, below.
Teledyne Analytical Instruments |