5 Maintenance | Model | |
|
|
|
|
|
|
|
|
|
5.2.4 Installing a New
Before installing a new cell, check the
1. Place the cell on the holder with the screen side facing down.
Note: There is a small location hole drilled in the holder. This hole mates with a guide pin on the bottom rear of the cell block. The hole in the cell block holder must align with the guide pin on the cell block.
2.With
3.Push the gate on the cell block down so that the slots on the side of the gate engage the locating screws on the side of the block. This forces the holder into position and forms a
5.2.5 Cell Warranty
The Class
With regard to spare cells, warranty period begins on the date of ship- ment. The customer should purchase only one spare cell (per section 5.2.1). Do not attempt to stockpile spare cells.
The
If a cell was working satisfactorily, but ceases to function before the warranty period expires, the customer will receive credit toward the purchase of a new cell.
If you have a warranty claim, you must return the cell in question to the factory for evaluation. If it is determined that failure is due to faulty work- manship or material, the cell will be replaced at no cost to you.
Note: Evidence of damage due to tampering or mishandling will render the cell warranty null and void.
Teledyne Analytical Instruments |