Teledyne 3000TA-XL-EU, Trace Oxygen Analyzer operating instructions Cleaning, Rear-Panel Screws

Trace Oxygen Analyzer Maintenance 5

•Power Supply

•Microprocessor

•Displays

5 digit LED meter

2 line, 20 character, alphanumeric, VFD display

•RS-232 Communications Port.

See the drawings in the Drawings section in back of this manual for details.

x x

x x

Figure 5-4: Rear-Panel Screws

To detach the rear panel, remove only the eight screws marked with an X.

5.6Cleaning

If instrument is unmounted at time of cleaning, disconnect the instru- ment from the power source. Close and latch the front-panel access door. Clean outside surfaces with a soft cloth dampened slightly with plain clean water. Do not use any harsh solvents such as paint thinner or benzene.

For panel-mounted instruments, clean the front panel as prescribed in the above paragraph. DO NOT wipe front panel while the instrument is controlling your process.

Teledyne Analytical Instruments 5-7