Teledyne 9060L, Percent Oxygen Analyzer Unpacking the Analyzer, Control Unit Installation

Page 23

Percent Oxygen Analyzer	Installation

Installation

Installation of the analyzer includes:

1.Unpacking the system.

2.Mounting the control unit.

3.Installing the probe.

4.Making electrical connections.

5.Testing the installation.

CAUTION: READ THIS CHAPTER IN ITS ENTIRETY BEFORE INSTALLING THE SYSTEM.

FOR INDOOR USE ONLY.

3.1 Unpacking the Analyzer

As soon as you receive the instrument, carefully unpack and inspect the control unit, and any included accessories for damage. Immediately report any damage to the shipping agent. The analyzer is shipped with all the materials you need to install and prepare the system for operation.

3.2 Control Unit Installation

The 9060L control unit is designed to be panel mounted in a general purpose, indoor area, away from moisture and the elements. The unit should be installed at viewing level in a sheltered area.

Refer to the Outline Diagram D-77712 in the Appendix for the physical dimensions of the analyzer.

3.3 9060L Oxygen Probe Installation

To install the probe, weld a BSP or NPT socket to the flue in a suitable position for flue gas sensing. For the correct size of socket refer to probe specifications located in the Appendix.

Teledyne Analytical Instruments

23

Image 23

Contents Teledyne Analytical Instruments Model 9060LCopyright 2005 Teledyne Instruments/ Analytical Instruments Model 9060LPercent Oxygen Analyzer Specific Model InformationSafety Messages Percent Oxygen Analyzer Table of Contents Index Teledyne Analytical Instruments MaintenanceOperation AppendixFront Panel List of FiguresList of Tables Combustible GAS Usage Percent Oxygen Analyzer Introduction Main Features of the AnalyzerIntroduction OverviewIntroduction Model 9060L Front Panel DescriptionSpan Rear Panel DescriptionRear Panel Percent Oxygen Analyzer Operational Theory Operational TheoryIntroduction Oxygen Probe, Sensor, and HeaterModel 9060L Oxygen Probe Operational Theory Model 9060LProbe Options Probe ConfigurationInternal Structure of the Zirconia Sensor and Probe Zirconia SensorHeater General Applications Not at Atmospheric PressureSensor Impedance ElectronicsSignal Processing Block Diagram Signal ProcessingOperational Theory Model 9060L Percent Oxygen Analyzer Installation InstallationControl Unit Installation 9060L Oxygen Probe InstallationInstallation Model 9060L Electrical Connections Primary Input PowerAnalog Outputs Alarm RelaysAlarm #2 4Model 9060L Heated Probe Cable Connection Oxygen Probe ConnectionsConnections to Probe Installation ChecklistInstallation Model 9060L Teledyne Analytical Instruments Percent Oxygen Analyzer Operation OperationOperation Model 9060L Using the Function and Data Entry ButtonsSetting the Analysis Ranges LO Range Setting the Alarm SetpointsSet Alarm 1 HI alarm HI RangeSelecting a Fixed Range or Autoranging Set Alarm 2 LO alarmSensor Fail Alarm Span Calibration Oxygen CalibrationOperation Model 9060L Air Calibration Probe TemperatureSupplementary Information Open Thermocouple Error MessagesLow Temperature Percent Oxygen Analyzer Operation Operation Model 9060L Teledyne Analytical Instruments Replacing the Fuse MaintenancePercent Oxygen Analyzer Maintenance Maintenance Model 9060L Appendix SpecificationsAppendix Model 9060L Probe SpecificationsAnalytical Instruments Spare Parts ListEmail asktai@teledyne.com Zirconia Oxygen Sensor Output mV Reference DrawingProbe or Sensor EMF Tables Percent Oxygen Analyzer Appendix Model 9060L Teledyne Analytical Instruments Index Index Model 9060L Percent Oxygen Analyzer