Panasonic CZ-RE2C2 Names and Operations, Operation Section, EN-2, Start/Stop button

2. Names and Operations

Operation Section

1.			(Start/Stop) button			6.	(Outing function) button
		Pushing this button starts, and pushing again				(		Outing Function)
		stops the unit.					1 2		3		4	5	6			7
2.				(Temperature setting) buttons
		Changing the temperature setting.
3.			(Mode Select) button
		Pushing this button to select an operation
		mode. (AUTO			→ HEAT → DRY →
		COOL		→ FAN	).
	4.		(Fan speed) button
EN
		Changing the fan speed.
		(	/	/ /	)	15
5.			(Swing/Air direction) button *1						14	13	12	11		10	9	8
		Use this button to set the auto swing or air
		direction to a specific angle.
	*1 Do not move the flap (vertical airflow
		adjustment board) with your hand.
		・The flap is automatically directed down
			when the unit is stopped.												3
		・The flap is directed up during the HEAT
			standby. The flap starts swinging after the				4

HEAT standby is cancelled, although the		2
AUTO flap indication on the remote control
	5
unit is displayed during the HEAT standby.
	6
			1

EN-2