Invacare 9000 SL, 9000 XT manual Removing or Replacing Armrest Figure, Armrest PAD, Clothing Guard

ARMS SECTION 4

NOTE: Armrest release lever MUST be in the unlocked position when placing armrest into the arm sockets.

4.Lock the swing-back arms by rotating the armrest release lever towards the inside of the wheelchair.

	Front
Swing	Armrest
Back Arm	Release
	Lever
Rear	Arm Socket

FIGURE 2 - SWING-BACK ARMS -

9000SL, 9000XT, 9000XDT

REPLACING DESK/FULL LENGTH ARMREST PAD AND/OR CLOTHING GUARDS (FIXED HEIGHT ARMS ONLY) (FIGURE 3)

ARMS

ARMREST PAD

1.Remove the mounting screws that secure the armrest pad to the armrest assembly.

2.Replace armrest pad and securely tighten with the existing mounting screws.

CLOTHING GUARD

1.Remove the four (4) mounting screws that secure the existing clothing guard to the armrest assembly.

2.Install NEW clothing guard and securely tighten with the existing mounting screws.

Mounting Screws Armrest Pad

Armrest

Assembly

Clothing

Guard

Mounting Screws

Mounting Screws

FIGURE 3 - REPLACING DESK/ FULL LENGTH ARMREST PAD AND/OR CLOTHING GUARDS (FIXED HEIGHT ARMS ONLY)

REMOVING OR REPLACING ARMREST (FIGURE 4)

NOTE: This procedure DOES NOT apply to 9000 SL wheelchairs.

WARNING

Make sure the armrest release lever is in the locked position before using the wheelchair.

REMOVING ARMRESTS

1.Unlock the armrest by turning the armrest release levers towards the outside of the wheelchair.

	Armrest
Armrest	Armrest
	Release
Release
	Lever
Lever
Arm Socket
	Arm
	Socket

FIGURE 4 - REMOVING OR

REPLACING ARMREST

2. Lift armrest completely out of arm sockets from the wheelchair.

REPLACING ARMRESTS

NOTE: Armrest release levers MUST be in the unlocked position when placing armrests into the arm sockets.

1.Place armrest into arm sockets located on the side of the wheelchair.

2.Lock the armrest by turning the armrest release levers towards the inside of the wheelchair.

Part No. 1056953 29 9000 Series