SECTION 9 | RECLINER |
STORING/REPLACING THE SPREADER BAR
RECLINER
STORING (FIGURE 5)
NOTE: The 9000XT RECLINER is folded for either storage or transporting. One side of the spreader bar must be removed and placed in a vertical position along side the recliner tube.
Removing From The Stored Position.
1.Rotate the end of the spreader bar 90o toward the opposite side frame.
2.Install threaded end of locking knob into locknut located on the opposite side frame. Securely tighten both knobs.
REAR VIEW OF 9000XT RECLINER
|
|
|
|
| Locking |
|
|
| Knob |
| Side |
|
|
| |
|
|
| Frame |
Spreader |
|
| |
| Bar |
|
|
Recliner | Locking | Threaded | |
| Tube | End | |
|
| Knob |
|
FIGURE 5 - STORING THE
SPREADER BAR
Placing In The Stored Position. |
| |
1. | Remove one (1) locking knob from the |
|
| spreader bar. | Locking |
2. | Loosen the remaining locking knob on | Knobs |
| ||
| the spreader bar. |
|
2. | Rotate detached end of the spreader |
|
| bar 90o down toward floor. |
|
REPLACING (FIGURE 6) |
| |
1. Remove both locking knobs that | Side | |
secure the spreader bar to the side | ||
Frame | ||
frames. | ||
|
2.Remove existing spreader bar.
3.Secure NEW spreader bar to the side
frames with the existing locking knobs. Securely tighten.
Spreader
Bar
Side
Frame
9000 Series | 48 | Part No. 1056953 |