Invacare 9000 XT, 9000 Series Installing the Solid Folding Seat Figure, Cleaning, Options Section

OPTIONS SECTION 10

CLEANING

WARNING

The user and O2 cylinder must be removed from the wheelchair when cleaning the O2 holder. Otherwise, injury or damage may occur if cleaning agents come in contact with the O2 regulator.

1.Remove the user, any I.V. medication and the O2 cylinder from the wheelchair.

2.The telescoping I.V. rod/O2 holders clean easily with any household glass type cleaner.

3.After the cleaning solution has dried, it is safe for the user to re-occupy the wheel- chair.

INSTALLING THE SOLID FOLDING SEAT (FIGURE 2)

1.Remove the existing seat upholstery from the wheelchair. Refer to REPLACING THE SEAT UPHOLSTERY in SECTION 5 of this manual.

OPTIONS

2.Slide solid folding seat with the seat brackets attached over the crossbraces.

3.Position the seat brackets in between the H-blocks of the seat frame.

4.Push the seat frame down and into the H-blocks making sure the solid folding seat brackets are positioned in-be- tween the H-blocks.

5.Place the other side of the solid folding seat (seat hooks) over the opposite side crossbrace.

Solid Folding

Seat

Seat Hook	Seat Bracket
	Washer

Phillips Screw

Bottom

FIGURE 2 - INSTALLING THE

SOLID FOLDING SEAT

INSTALLING THE CRUTCH AND CANE CARRIER (FIGURE 3)

WARNING

Check base weekly to ensure proper placement.

When loading the crutch/cane carrier, Ensure items are securely placed into the base. Also ensure that there is no intereference with folding the wheelchair, the rear wheels, or the swing-back arms.

Strap MUST be securely fastened while carrying items. Never insert or remove items while wheelchair is moving.

Part No. 1056953 55 9000 Series