Invacare 9000XT Recliner, 9000 XT, 9000 Series Adjusting Figure, ANTI-TIPPERS/WHEEL Locks Section

ANTI-TIPPERS/WHEEL LOCKS SECTION 8

ADJUSTING (FIGURE 2)

1.Press the release buttons on the wheeled portion of the anti-tipper and slide it up or down to achieve the 1-1/2 to 2-inch clearance.

2.Check to make sure that the release buttons are fully engaged in adjustment holes.

NOTE: Refer to the following charts to ensure the correct anti-tipper is installed in the wheel- chair. Seat-to-Floor heights are approximate de- pending on front caster size and type. Anti-Tip- per length measurement is taken with the ex- tension tube in the longest position available.The anti-tipper height measurement MUST be taken with the anti-tipper on a flat surface.

Release Buttons

1-1/2 to 2-inch Clearance

FIGURE 2 - ADJUSTING THE

ANTI-TIPPERS

Anti-Tipper	Flat Surface
Height
	Anti-Tipper Length

ANTI-TIPPERS/WHEEL LOCKS

9000 XT (SUPER LOW FRAME)

CASTER	SEAT-TO-FLOOR	ANTI-TIPPER	ON CHAIR	OFF CHAIR
SIZE	HEIGHT	LENGTH / HEIGHT		KIT NUMBER
6-inch	13-1/2 and 14-1/2-inches	10-1/2 / 2-inches	1360SH	1064520
	9000 XDT (ADULT TALL FRAME)
CASTER	SEAT-TO-FLOOR	ANTI-TIPPER	ON CHAIR	OFF CHAIR
SIZE	HEIGHT	LENGTH / HEIGHT		KIT NUMBER
8-inch	17-1/2 and 19-1/2-inches	11-5/8 / 2-3/4-inches	1360A	1058752
8-inch	21-1/2-inches	13-1/2 / 3-1/2-inches	1360	1058836
9000 XT WITH 0° SEAT-TO-FLOOR ANGLE (ADULT/HEMI FRAME)
CASTER	SEAT-TO-FLOOR	ANTI-TIPPER	ON CHAIR	OFF CHAIR
SIZE	HEIGHT	LENGTH / HEIGHT		KIT NUMBER
8-inch	17-1/2,18-1/2-inches	13-1/2 / 3-1/2-inches	N/A	1058836
6-inch	16-1/2,17-1/2-inches	13-1/2 / 3-1/2-inches	N/A	1058836
	15-1/2-inches	11-5/8 / 2-3/4-inches	N/A	1058752
9000 XT WITH 3° SEAT-TO-FLOOR ANGLE AND 9000 SL (ADULT/HEMI FRAMES)
CASTER	SEAT-TO-FLOOR	ANTI-TIPPER	ON CHAIR	OFF CHAIR
SIZE	HEIGHT	LENGTH / HEIGHT		KIT NUMBER
8-inch	17-1/2,18-1/2,19-1/2-inches	13-1/2 / 3-1/2-inches	1360	1058836
6-inch	15-1/2,16-1/2,17-1/2-inches	11-5/8 / 2-3/4-inches	1360A	1058752
9000 XT WITH 6° SEAT-TO-FLOOR ANGLE (ADULT/HEMI FRAME)
CASTER	SEAT-TO-FLOOR	ANTI-TIPPER	ON CHAIR	OFF CHAIR
SIZE	HEIGHT	LENGTH / HEIGHT		KIT NUMBER
8-inch	17-1/2,18-1/2,19-1/2-inches	13-1/2 / 2-7/8-inches	N/A	1113766
6-inch	16-1/2,17-1/2-inches	12-1/2 / 2-3/4-inches	N/A	1113765
	15-1/2-inches	9-1/2 / 2-3/8-inches	N/A	1113764

Part No. 1056953 41 9000 Series