Invacare 9000 XT, 9000XT Recliner, 9000 Series, 9000 XDT With Patient Operated Wheel Locks Figure

RECLINER

SECTION 9 RECLINER

REMOVING/INSTALLING THE REAR WHEELS

NOTE: If replacing the same size rear wheel, this procedure is performed.

WARNING

If changing the size of the rear wheel or if a change in the SEAT-TO- FLOOR HEIGHT is desired, this procedure must be performed by a qualified technician.

WITH PATIENT OPERATED WHEEL LOCKS (FIGURE 8)

1.Remove the axle mounting screw and locknut that secure the patient oper- ated wheel lock, spacers, and rear wheel to the wheelchair frame.

2.Secure rear wheel, patient operated wheel lock, and spacers to wheelchair frame with axle mounting screw and locknut. Securely tighten.

Wheelchair Frame

LocknutPatient Operated

Wheel Lock

Axle

Mounting

Screw

Spacers

Rear Wheel

FIGURE 8 - REMOVING/

INSTALLING THE REAR WHEELS -

WITH PATIENT OPERATED

WHEEL LOCKS

WITH ATTENDANT OPERATED WHEEL LOCKS (FIGURE 9)

1.Remove the axle mounting screw and locknut that secure the rear wheel and spacer to the wheelchair frame.

2.Remove rear wheel from side frame.

3.Secure rear wheel and spacer to wheelchair frame with axle mounting screw and locknut. Securely tighten.

Locknut

Axle	Wheelchair Frame
Mounting
Screw

Spacer

Rear Wheel

FIGURE 9 - REMOVING/

INSTALLING THE REAR WHEELS -

WITH ATTENDANT

OPERATED WHEEL LOCKS

9000 Series 50 Part No. 1056953