Invacare TPO100 Power Input, External Power Supply Input, Sound Level, Altitude, Sensitivity

SECTION 5—TYPICAL PRODUCT PARAMETERS

POWER INPUT:	24 VDC @ 7.5 Amp
	or
	11-16 VDC @ 10.0 Amp max
	(12.6 VDC Nom.)
EXTERNAL POWER SUPPLY
INPUT:
AC POWER SUPPLY:	120 VAC, 50/60 Hz @ 2.5 amps
	230 VAC, 50/60 Hz @ 1.25 amps
DC POWER SUPPLY:	11-16 VDC,
	(12.6 VDC Nom. @ 10.0 Amp max)
SOUND LEVEL:	< 40 dBA weighted @ 2 LPM continuous and
	all pulse settings (1-5)
ALTITUDE:	Up to 10,000 ft (3046 m) above sea level
	Titration recommended for use above 10,000
	ft (3046 m)
OXYGEN CONCENTRATION:*	87% to 95.6%, after initial warm-up period
*BASED ON AN ATMOSPHERIC	(approximately 5 minutes) at all flow rates
PRESSURE OF 14.7 PSI (101 KPA) AT
70°F (21°C) NOMINAL
CONSERVER TRIGGER	< 0.20 cmH2O max pressure drop
SENSITIVITY:
FACTORY SET - NO ADJUSTMENT	All settings - using 7 ft (2.1 m) cannula
PRESSURE ACTIVATED
CONSERVER TRIGGER DELAY:	35 mSec max
FACTORY SET - NO ADJUSTMENT
	Nominal value - using 7 ft (2.1 m) cannula
CONSERVER BOLUS	Setting 1: 400 cc
DELIVERY:	Setting 2: 800 cc
FIXED MINUTE VOLUME	Setting 3: 1200 cc
	Setting 4: 1600 cc
	Setting 5: 2000 cc
	Total cc’s ± 75 cc delivered per minute
CONSERVER BREATH RATE	Up to, and including, 35 BPM without
CAPACITY:	reduction of bolus minute volume
CONTINUOUS FLOW	0.5 through 3.0 LPM @ 0 psi
SETTINGS:	0.5 LPM increments
	All settings are ± 0.2 LPM
	(2.0 LPM max w/Ext DC Power Cable)

Part No 1156872 15 Invacare SOLO2™