Invacare TPO100B Unit is Beeping with no Lights or Display, Symptom Probable Cause Solution

Page 36

SECTION 8—TROUBLESHOOTING GUIDE

NO CHARGING SYMBOL SHOWN ON STANDBY SCREEN

SYMPTOM

PROBABLE CAUSE

SOLUTION

With the unit turned

Power source is no good, or

Try another power outlet

Off and AC or DC

there is a loose connection.

and check connections to

power plugged into

 

unit.

the unit, no charging

 

 

Battery is outside the allowed

Allow unit to cool down to

icon is displayed.

temperature range for charging.

less than 95° F

 

 

 

(35° C), or warm up to 50° F

 

 

(10° C).

 

 

 

 

Battery module is not fully

Ensure the battery module is

 

seated.

completely inserted.

 

 

 

 

Standby screen is not being

Press the On/Off button to

 

displayed.

display the Standby screen

 

 

when using DC power.

 

 

 

 

UNIT IS BEEPING WITH NO LIGHTS OR DISPLAY

 

 

 

SYMPTOM

PROBABLE CAUSE

SOLUTION

All power sources are

Battery pack has been removed

Install any battery pack

missing.

and there is no external power

available.

 

While operating without a

Beeping will last 10-15

 

battery, the external power is

minutes if no power source

 

lost.

is provided.

 

 

 

Invacare SOLO2

36

Part No 1156872

Image 36
Contents Invacare SOLO2 Transportable Oxygen Concentrator Accessories Warning Table of Contents Special Notes Special Notes Disposal of Equipment and Accessories General Guidelines Operating Information General Guidelines Maintenance Radio Frequency InterferencePolarized Plug Instruction Packaging and Handling UnpackingInspection StorageTechnical Description Features REDTypical Product Parameters No AP/APGPower Input External Power Supply InputConserver Trigger Delay SettingsLPM Continuous Dimensions WeightBattery Duration Battery Recharge TimeRegulatory Listing Operating Instructions LocationRecommendations for Optimal Performance FiltersPowering the Transportable Oxygen Concentrator Detail a Battery Module Detail B DC Power Cable Detail C AC Power AdapterInstalling the Battery Module Charging the BatteryBattery Time Management Checking Battery Charge Level Prolonging Battery LifeConnecting/Positioning the Nasal Cannula Detail aDetail B Connecting the Humidifier Remove cap from bottleIndicators and Audible Alarm Detail a Detail BControl/Adjustment Buttons LCD Displays Mode & Flow Adjustment Screen Typical Warning Screen Typical Alarm Screen Invacare SOLO2 Detail a Front Panel Detail B LCD Display IconsUsing the SOLO2 Transportable Oxygen Concentrator CLEANING, CARE, and Maintenance CabinetAir Intake Filter Cleaning the Cannula Cleaning the HumidifierPreventative Maintenance Record Transportable Oxygen ConcentratorTroubleshooting Guide TroubleshootingSymptom Probable Cause Solution Unit is Beeping with no Lights or DisplayLCD Display Indicators Description SolutionsAcknowledgement Required Double audible beep every 15 sec Turn unit Off. Wait one minute, then Move unit to warmer, or cooler Troubleshooting Guide Ten audible beeps every 10 sec Ten audible beeps every 10 sec RED indicator Flashing Fast Continuous audible beep every half Troubleshooting Guide Make sure that car boat or motor Optional Accessories Limited Warranty Limited Warranty European Contacts European Contacts USA EC REP