SECTION
SECTION 6—OPERATING
INSTRUCTIONS
Location
WARNING
NEVER block the air opening of the product or place it on a soft surface, such as a bed or couch, where the air opening may be blocked. Keep the openings free from lint, hair and the like.
Keep unit at least 3 in (7.6 cm) away from walls, draperies,
furniture, and the like.
Locate and position the transportable oxygen concentrator in a well ventilated space so that the air intake and the air exhausts are not obstructed.
Recommendations for Optimal Performance
Operating Temperature: | 41°F to 95°F (5°C to 35°C) |
|
|
Relative Humidity: | 15% to 60% |
|
|
Transport/Storage Temperature: | |
| Allow unit to warm, or cool, to operating |
| temperature range before using. |
|
|
Electrical: | No extension cords. |
|
|
Altitude: | Up to 10,000 ft (3046 m) above sea level. |
|
|
Tubing and Cannula: | 7 ft (2.1 m) crush resistant cannula |
| (DO NOT pinch). |
|
|
Environment: | Smoke, pollutant and fume free. No confined |
| spaces (example: no closets). |
|
|
Time of Operation: | Up to 24 hours per day when connected to AC or |
| DC power. |
|
|
Filters
Air enters the transportable oxygen concentrator through an air intake filter located on the left side of the unit. This filter prevents hair and other large particles in the air from entering the unit. Before you operate the transportable oxygen concentrator, make sure the filter is clean, dry and properly positioned.
To clean/replace the air intake filter, refer to Cleaning, Care, And Maintenance on page 32.
Invacare SOLO2™ | 18 | Part No 1156872 |