MODEL | SECTION 5.0 |
| SOFTWARE CONFIGURATION |
Table
TABLE 5-1. Program Settings List
| ITEM | CHOICES | FACTORY SETTINGS |
SETPOINTS |
|
| |
A. Alarms (Section 5.1) |
|
| |
1. | Alarm 1 (low action) |
|
|
| a. if oxygen (ppm) | 0 ppm | |
| b. if oxygen (% saturation) | 0 to 200% | 0 % |
| c. if temperature | 0.1°C | |
2. | Alarm 2 (high action) |
|
|
| a. if oxygen (ppm) | 20 ppm | |
| b. if oxygen (% saturation) | 0 to 200% | 200 % |
| c. if temperature | 130°C | |
3. Alarm 3 | See alarm 2 | See alarm 2 | |
B. Outputs (Section 5.2 and 5.3) |
|
| |
1. | Output 1 or 2: 4 mA setting |
|
|
| a. if oxygen (ppm) | 0 ppm | |
| b. if oxygen (% saturation) | 0 to 200% | 0 % |
| c. if temperature | 0.1°C | |
2. | Output 1 or 2: 20 mA setting |
|
|
| a. if oxygen (ppm) | 20 ppm | |
| b. if oxygen (% saturation) | 0 to 200% | 200% |
| c. if temperature | 130°C | |
CONFIGURE |
|
| |
A. Display options (Section 5.4) |
|
| |
1. | Measurement | Oxygen, ozone, free chlorine, total chlorine | Oxygen |
2. | Sensor (Oxygen only) | Rosemount standard, Rosemount biopharm, or | Rosemount standard |
|
| other steam sterilizable |
|
3. | Units (Oxygen only) | ppm, ppb, % saturation | ppm |
4. Temperature units | °C or °F | °C | |
5. | Output 1 | mA or % of full scale | mA |
6. | Output 2 | mA or % of full scale | mA |
7. | Language | English, Français, Español, Deutsch, Italiano | English |
8. | Main display left | See section 5.5 | Sensor current |
9. | Main display right | See section 5.5 | Output 1 current |
10 Display contrast | 50 | ||
11. Test timeout | On or off | On | |
12. Timeout value | 1 to 60 min | 10 min | |
|
|
|
|
Continued on the following page
21