ASSEMBLY
Wands
Button
Bouton
Botón
Wand Swivel 
Pivot du tube Dispositivo giratorio del mango
➢Slide wands together until wand
button snaps into place.
➢Turn wand button to slotted area of wand swivel
Cord Holder
Attache du cordon
Sujetador del cordón
Power Nozzle
Raised Area
Portion en relief Área elevada
Up and In
Vers le haut et à l’intérieur
Hacia arriba y hacia dentro
➢Insert wands into POWER NOZZLE until the wand button snaps into the grooved slot.
➢Connect POWER NOZZLE plug and cord as shown.
➢Do not force.
➢Raised area of plug must face toward hand.
➢If hard to install, turn the plug over and try again.
To Remove:
➢Press wand release button
➢Pull wands out of POWER NOZZLE.
- 14 -