Removing Belt
Tab
Languette
Pestaña
Base
Agitator Support
Support de l’agitateur
Soportes del agitador
➢Disconnect cleaner from electrical outlet.
➢Frequently check and remove hair, string and lint
➢If
➢Remove light cover and light bulb as shown under “REPLACING HEADLIGHT BULB”.
➢Unscrew the two (2) POWER NOZZLE cover screws .
➢Turn POWER NOZZLE over.
➢To remove cover, insert screwdriver at cover tabs on both sides and twist to release tabs.
➢Turn POWER NOZZLE right side up.
➢Press handle release pedal and lower the swivel.
➢Tilt cover forward from back until front snaps free.
➢Carefully insert and twist screwdriver at each brush support to free brush from base.
➢Remove worn belt.
➢See AGITATOR ASSEMBLY for picture of complete brush assembly.
- 38 -