POWER NOZZLE CARE
Always follow all safety precautions when cleaning and servicing the POWER NOZZLE.
WARNING
Electrical Shock or Personal Injury Hazard.
Disconnect the electrical supply before ser- vicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.
Replacing Headlight Bulb
Push in and turn
Enfoncer et tourner Empuje hacia adentro y gire
➢To remove light cover use a flat blade screwdriver, gently prying up one side of the light cover.
➢After freeing one side, lift up to remove.
➢Push in and turn bulb counter- clockwise to remove.
➢Replace the bulb.
➢Only use a bulb rated 130 V
To Replace:
➢Fit the rear tabs into the rear of the housing and press the sides down until it snaps into place.
- 36 -