Motor Safety Filter Cleaning
➢Occasionally check motor safety filter and clean when dirty.
! |
WARNING
Electrical Shock Hazard
Do not operate the cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock.
➢ Unplug cord from wall outlet
➢ Pull out filter and frame as shown ➢ Replace filter
➢ Filter cannot be cleaned and should be replaced at least once a year
➢ Snap filter and frame into canister ➢ Insert bag
➢ DO NOT CLEAN FILTER WITH WATER
➢ DO NOT operate the cleaner without filter
Cleaning Exterior and Tools
➢Unplug cord from wall outlet.
➢Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water and wrung dry.
➢DO NOT drip water on cleaner. Wipe dry after cleaning.
➢DO NOT clean tools in dishwasher or clothes washer.
➢Wash tools in warm soapy water, rinse and air dry.
➢DO NOT use tools if they are wet.
- 34 -